Page Top
FULL CONE NOZZLES:
widely used in the industry, for a wide variety of applications.
used in the industry, for a wide variety of applications. They maintain the simple design of the smaller nozzles, With the inherent resistance to clogging due to design of the X-vane and are often manufactured by any type of machinable material like SS304, SS316, PP/PVC etc.
Flow Rate : 96 LPM to 1200 LPM
Application : Surface spraying, Washing & Cooling of flue gasses to remove fly ash , Cooling condenser, Scrubbing, Foam breaking.
These hollow cone nozzles work on the tangential flow principle and are manufactured by machine tool operation from metal bar stock. This offers versatile construction of small sized nozzles. In addition nozzles can be made on request from any special materials and alloys that are available as a bar stock.
There are Following types of hollow cone nozzles: (1) Tangential Entry (2) Inline (Axial) Entry (3) Spiral Hollow cone.
Design : Vaneless (Two Piece Construction ) Non clogging
Application : Cooling & Washing of gas
TANK WASHING NOZZLES:
Suited for CIP systems. No motor source is needed due to the reaction force of the cleaning liquid...
Suited for CIP systems. No motor source is needed due to the reaction force of the cleaning liquid to rotate spray head. Low pressure for cleaning and rinsing application. For rinsing small and medium sized vessels for example dairy, chemical, pharmaceutical and food industries. Material of construction-corrosion resistance TEFLON.
Application : Cleaning of tanks up to 3 m in diameter. Self - rotating. Double bearings.
Compact stream jet with a defined jet length owing to optimum flow geometry.
Compact stream jet with a defined jet length owing to optimum flow geometry. Flow conditions are not affected by turbulence. A concentrated jet with high impact force is achieved. This is used for powerful punctiform impact, wherever concentrated jet power is vital.
Characteristic : A high efficiency and economical performance is obtained.
Design : One Piece Construction.
Application : For High pressure cleaning systems, Jet Cutting and separating.
Features : Optimized flow maximum jet power concentrated energy.
.
Air Atomizing Spray Nozzle mixes liquid & air to give fine mist like formation. In common situation we can get super fine liquid spraying drops. Adjustable atomized nozzles can adjust liquid capacity and it can meet the requirement of spraying without changing air pressure and hydraulic pressure therefore it has good adaptability. Each spray device is composed of air cap and liquid cap which can offer two spray modes flat fan and round with wide liquid capacity coverage. There are various available sizes of inlet joint for these type of Spray Nozzles. It is flexible with changeable parts. Atomizing Nozzle has good moisture effect. It is the ideal choice for the location where requires moisture control.
Application: Moisturization, Mould Lubricating, Spraying Injection, Air Disinfection, Humidification.
Continuous Casting Cooling. Produces a full cone pattern.
Application: Continuous Casting Cooling.
Spray Characteristics : [1] Produces a full cone pattern [2] Sprayed volume is evenly distributed across spray pattern [3] Available with a range of spray angle
Materials and Construction : [1] Standard materials are Brass and Stainless Steel [2] Male and female thread available [3] 3/8" or 1/4" BSP / NPT threaded connections available [4] Specially designed internal core ensures a good resistance to clogging.
Eductors have a unique venturi design which enables smaller pumps.
Eductors have a unique venturi design which enables smaller pumps to circulate large volumes of tank solution. The eductor will circulate four to five gallons of solution for each gallon pumped. Eductors are used for mixing chemicals, suspending solids, adjusting ph,” sweeping” debris or sludge toward a filter intake and many other useful applications
Oil burner nozzles are available in semi hollow cone spray pattern.
Oil burner nozzles are available in semi hollow cone spray pattern. Micro-finish of tip & disc seats permitting flow only through the slots of the disc, plus extremely close manufacturing tolerances, ensure accurate capacity control. These nozzles are fitted with filter in order to provide highly efficient in depth filtration with one piece construction extra fine filter microns are supplied as standard on all small capacity nozzles.
Application: LDO firing in kilns of cement, sponge, Iron plants & Dust suppression.
Range :
Spray Angle: 45º,60º,70º,80º & 90º.
Flow rate (GPH) at 100 PSI Pressure : 2.50, 3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00...... GPH.
Connection : UNF 9/16”
M.O.C. : SS 303
Page Top
HOLLOW CONE NOZZLES:
Page Top
Page Top
STRAIGHT JET NOZZLES:
Page Top
AIR ATOMIZING NOZZLES:
Page Top
STEEL MILLS AND ENGINEERING SYSTEMS:
Page Top
TANK MIXING EDUCTORS:
Page Top
OIL BURNER NOZZLES:
Page Top